Automation Builder can be used to configure the parameters of CI5xx devices.
Configuration of S500 I/O modules can be performed without CI5xx devices connected.
Adding CI5xx device to the device tree
-
Right click the node “Slot1” or “Slot2” of the “Extension_Bus” in the device tree and click “Add object”.
The window “Replace object : Slot <...>” opens.
-
Select the “CM5xx master module” and click [Add object].
The “CM5xx master” appears in the slot.
-
Right click the “CM5xx master module” and click “Add object”.
The window “Add object below : <...>_Master” opens.
-
Select the “CI5xx” device and click [Add object].
The “CI5xx” device appears in the device tree.
Adding S500 I/O modules
-
Right click the “CI5xx” device and click [Add object].
The window “Add object below:” opens.
-
Select the I/O module and click [Add object].
The I/O module is added.
Configure parameters
-
Double-click the “CI5xx” device to open the editors and select the “CI5xx_IO Parameters” tab.
This editor shows the parameters that can be set for each device.